Unstable operation of the camera stabilizer V01.0.0100-nolimitdronez.com

Daniel

Total Posts: 1
Joined: 5/26/2019

PM

Posted: 5 years ago

#5160 Quote

E wrote:

Can anyone help to solve this issue? I am having the same problem after downgrading from .400 to .100. Camera stabilizing became unstable, and it always show IMU need to be recal. But I have recal IMU numerous time didn't solve the problem.

I thought I had a couple of bad units! I downgraded from .400 to .100 via the Firmware Manager in NLD Mod Client 1.9.3.7 on two Mavic 2 Pros. One of them has a roll drift that comes on with the slightest movement of the Mavic. The other has a random yaw twitch of just the gimbal. Neither improved after IMU and gimbal calibration. I'll upgrade the f/w to .400 using NLD Mod Client, and report back if either works normally on .400.

0

Jason

Total Posts: 13
Joined: 2/20/2020

PM

Posted: 5 years ago

#5162 Quote

I haven't had this issue with 2 of my Mavic 2 pros in firmware .100. both have been patched with the NFZ and FCC.

0

SIN1986

Total Posts: 4
Joined: 3/11/2020

PM

Posted: 5 years ago

#5169 Quote

Jason wrote:

I haven't had this issue with 2 of my Mavic 2 pros in firmware .100. both have been patched with the NFZ and FCC.

0

SIN1986

Total Posts: 4
Joined: 3/11/2020

PM

Posted: 5 years ago

#5184 Quote

Jason wrote:

I haven't had this issue with 2 of my Mavic 2 pros in firmware .100. both have been patched with the NFZ and FCC.

this will be the case for new aircraft in 2019,but not for 2018

0

michael

Total Posts: 1
Joined: 3/27/2020

PM

Posted: 5 years ago

#5213 Quote

Maybe they will mod the .0400 software soon since its a drone that lots of people have recently purchased and is still a popular drone to buy.

Btw, how did you downgrade to the .0100 software. My DJI Assistant 2 says I can downgrade to .0300 which I did but not sure how to get down to .0100??

I've also tried using 3rd party softwares like DUMLdor V3 to downgrade but no luck :( Maybe because I bought a drone that only had the .0300 software on it originally does this mean I can't go below that???

PLEASE HELP, I'll send you a free new flip 360 mini drone in the mail if USA blogger :)

0

Jason

Total Posts: 13
Joined: 2/20/2020

PM

Posted: 5 years ago

#5216 Quote

If you hadn't upgraded it since buying with firmware .300 on you should be able to downgrade with DUMLdor. If however you upgraded using the app you will be out of luck. I purchased 2 new made in 2018 recently to make sure they had .100 firmware.

michael wrote:

Maybe they will mod the .0400 software soon since its a drone that lots of people have recently purchased and is still a popular drone to buy.

Btw, how did you downgrade to the .0100 software. My DJI Assistant 2 says I can downgrade to .0300 which I did but not sure how to get down to .0100??

I've also tried using 3rd party softwares like DUMLdor V3 to downgrade but no luck :( Maybe because I bought a drone that only had the .0300 software on it originally does this mean I can't go below that???

PLEASE HELP, I'll send you a free new flip 360 mini drone in the mail if USA blogger :)

0

SIN1986

Total Posts: 4
Joined: 3/11/2020

PM

Posted: 5 years ago

#5615 Quote

michael wrote:

Maybe they will mod the .0400 software soon since its a drone that lots of people have recently purchased and is still a popular drone to buy.

Btw, how did you downgrade to the .0100 software. My DJI Assistant 2 says I can downgrade to .0300 which I did but not sure how to get down to .0100??

I've also tried using 3rd party softwares like DUMLdor V3 to downgrade but no luck :( Maybe because I bought a drone that only had the .0300 software on it originally does this mean I can't go below that???

PLEASE HELP, I'll send you a free new flip 360 mini drone in the mail if USA blogger :)

I already know how to solve the problem of the gimbal version 0400-0100. You must remove the gimbal after installing the 0400 version. After the aircraft version is updated to the 0100 version, install the gimbal to solve the gimbal problem.

0

SIN1986

Total Posts: 4
Joined: 3/11/2020

PM

Posted: 5 years ago

#5616 Quote

I already know how to solve the problem of the gimbal version 0400-0100. You must remove the gimbal after installing the 0400 version. After the aircraft version is updated to the 0100 version, install the gimbal to solve the gimbal problem.

0

V

Total Posts: 1
Joined: 11/30/2019

PM

Posted: 5 years ago

#5624 Quote

SIN1986 wrote:

I already know how to solve the problem of the gimbal version 0400-0100. You must remove the gimbal after installing the 0400 version. After the aircraft version is updated to the 0100 version, install the gimbal to solve the gimbal problem.

Can you please elaborate on this? I have the same issue where .0100 version has gimbal stabilization problems. How do you remove the gimbal after installing the 0400 version?

0