OK here (Italy)
0
"My secret is cod..."
Sunday, December 14, 2025 5:53:42 PM
Can someone please confirm that the NFZ patch worked on the Mavic 2?
I just got my bird back under warranty from DJI and they replaced it with a new one after having the loop firmware stuck on 75% issue.(after trying to apply the NFZ patch on firmware .0000)
I will try again to apply the NFZ patch on the correct firmware .0100 and see if it works.
(will never try to apply the patch again on anything ending in four zeros)
I will try again to apply the NFZ patch on the correct firmware .0100 and see if it works.
(will never try to apply the patch again on anything ending in four zeros)
0
Alex wrote:
I upfated from 0000 to 0100 yesterday with nld app, update process also stuck at 85% but(!) bird is sucsessfully flashed, its just NLD which cant reconnect automaticly after AC reboot during flashing process. if your front leds are green - you are flashed fine.
I am the owner of mavic 2 pro, tried with V01.00.0200 roll back to V01.0.0100
85% of the process update stops. tried several times. created a ticket in support.
85% of the process update stops. tried several times. created a ticket in support.
I upfated from 0000 to 0100 yesterday with nld app, update process also stuck at 85% but(!) bird is sucsessfully flashed, its just NLD which cant reconnect automaticly after AC reboot during flashing process. if your front leds are green - you are flashed fine.
0
Dimitri wrote:
I'm not quite sure, please create a ticket with a similar problem.
I had hangs at 70 percent, and 75 and 80, and most often 85%
Different modules were updated, Device_OS hangs by 85%. freezed the upgrade and other modules < 85%, I do not remember the name now.
I am the owner of mavic 2 pro, tried with V01.00.0200 roll back to V01.0.0100
85% of the process update stops. tried several times. created a ticket in support.
I upfated from 0000 to 0100 yesterday with nld app, update process also stuck at 85% but(!) bird is sucsessfully flashed, its just NLD which cant reconnect automaticly after AC reboot during flashing process. if your front leds are green - you are flashed fine.
85% of the process update stops. tried several times. created a ticket in support.
I upfated from 0000 to 0100 yesterday with nld app, update process also stuck at 85% but(!) bird is sucsessfully flashed, its just NLD which cant reconnect automaticly after AC reboot during flashing process. if your front leds are green - you are flashed fine.
I'm not quite sure, please create a ticket with a similar problem.
I had hangs at 70 percent, and 75 and 80, and most often 85%
Different modules were updated, Device_OS hangs by 85%. freezed the upgrade and other modules < 85%, I do not remember the name now.
0
Am glad to report that finally the NFZ patch for my M2 worked!!!!!!!!!!!!!!!!!!!!!
I received a new bird from DJI after being stuck with that issue of freezing at 75% with firmware .0000
This is exactly what I did:
I flashed the bird to .0100 with DUMLdore v3.2 ( I tried to stay away from DJI assistant 2 this time and NDL Mod Client did not recognize the current firmware 0.00.0000) so I used this firmware flashing tool which is awesome by the way.
You need to have the .0100 in your computer first but if you don't have it it's ok, this tool will direct you to another tool which you can use to download virtually all the versions for different DJI birds. You need v1.00.0100 for Mavic 2
Then when on .0100 I used the new Mod Client 1.9.1.0 to apply the NFZ patch.
I am using DJI GO4 4.3.16 which I side loaded into my Android tablet. ( I felt like side loading it and not getting it directly from the Google Play Store) I got it from apkmirror.com
Then this is the order of how I coonected and ran it.
I left the internet connection on to sign in on the tablet into the DJI account but did not connect it physically to the remote control or aircraft. After I signed in and could go into camera view to confirm that the app opens I closed the app turn airplane mode on and connected to the remote control and the aircraft.
I was able to turn on the motors and get a green flashing light at the rear of my bird in a red no-fly zone. You will still get warnings on the remote control and on the app which will disappear after a little while.
I received a new bird from DJI after being stuck with that issue of freezing at 75% with firmware .0000
This is exactly what I did:
I flashed the bird to .0100 with DUMLdore v3.2 ( I tried to stay away from DJI assistant 2 this time and NDL Mod Client did not recognize the current firmware 0.00.0000) so I used this firmware flashing tool which is awesome by the way.
You need to have the .0100 in your computer first but if you don't have it it's ok, this tool will direct you to another tool which you can use to download virtually all the versions for different DJI birds. You need v1.00.0100 for Mavic 2
Then when on .0100 I used the new Mod Client 1.9.1.0 to apply the NFZ patch.
I am using DJI GO4 4.3.16 which I side loaded into my Android tablet. ( I felt like side loading it and not getting it directly from the Google Play Store) I got it from apkmirror.com
Then this is the order of how I coonected and ran it.
I left the internet connection on to sign in on the tablet into the DJI account but did not connect it physically to the remote control or aircraft. After I signed in and could go into camera view to confirm that the app opens I closed the app turn airplane mode on and connected to the remote control and the aircraft.
I was able to turn on the motors and get a green flashing light at the rear of my bird in a red no-fly zone. You will still get warnings on the remote control and on the app which will disappear after a little while.
0
Confirmed, working here. I am able to start the motors for the first time inside my house in over half a year.
Heres my bird looking outside.
I am over a mile out from the end of a runway of a little airport, thus the red NFZ. Now when I show up at a job with a legal wavier, I don't have to worry about DJI's app not accepting it and ruining the job...
https://pasteboard.co/Ifcervr.png
Heres my bird looking outside.
I am over a mile out from the end of a runway of a little airport, thus the red NFZ. Now when I show up at a job with a legal wavier, I don't have to worry about DJI's app not accepting it and ruining the job...
https://pasteboard.co/Ifcervr.png
0
Gregory wrote:
ı can not found 01.01.100 version where the foun to firemware pls help me
Am glad to report that finally the NFZ patch for my M2 worked!!!!!!!!!!!!!!!!!!!!!
I received a new bird from DJI after being stuck with that issue of freezing at 75% with firmware .0000
This is exactly what I did:
I flashed the bird to .0100 with DUMLdore v3.2 ( I tried to stay away from DJI assistant 2 this time and NDL Mod Client did not recognize the current firmware 0.00.0000) so I used this firmware flashing tool which is awesome by the way.
You need to have the .0100 in your computer first but if you don't have it it's ok, this tool will direct you to another tool which you can use to download virtually all the versions for different DJI birds. You need v1.00.0100 for Mavic 2
Then when on .0100 I used the new Mod Client 1.9.1.0 to apply the NFZ patch.
I am using DJI GO4 4.3.16 which I side loaded into my Android tablet. ( I felt like side loading it and not getting it directly from the Google Play Store) I got it from apkmirror.com
Then this is the order of how I coonected and ran it.
I left the internet connection on to sign in on the tablet into the DJI account but did not connect it physically to the remote control or aircraft. After I signed in and could go into camera view to confirm that the app opens I closed the app turn airplane mode on and connected to the remote control and the aircraft.
I was able to turn on the motors and get a green flashing light at the rear of my bird in a red no-fly zone. You will still get warnings on the remote control and on the app which will disappear after a little while.
I received a new bird from DJI after being stuck with that issue of freezing at 75% with firmware .0000
This is exactly what I did:
I flashed the bird to .0100 with DUMLdore v3.2 ( I tried to stay away from DJI assistant 2 this time and NDL Mod Client did not recognize the current firmware 0.00.0000) so I used this firmware flashing tool which is awesome by the way.
You need to have the .0100 in your computer first but if you don't have it it's ok, this tool will direct you to another tool which you can use to download virtually all the versions for different DJI birds. You need v1.00.0100 for Mavic 2
Then when on .0100 I used the new Mod Client 1.9.1.0 to apply the NFZ patch.
I am using DJI GO4 4.3.16 which I side loaded into my Android tablet. ( I felt like side loading it and not getting it directly from the Google Play Store) I got it from apkmirror.com
Then this is the order of how I coonected and ran it.
I left the internet connection on to sign in on the tablet into the DJI account but did not connect it physically to the remote control or aircraft. After I signed in and could go into camera view to confirm that the app opens I closed the app turn airplane mode on and connected to the remote control and the aircraft.
I was able to turn on the motors and get a green flashing light at the rear of my bird in a red no-fly zone. You will still get warnings on the remote control and on the app which will disappear after a little while.
ı can not found 01.01.100 version where the foun to firemware pls help me
0
Gregory wrote:
ı can not found 01.01.100 version where the foun to firemware pls help me
Am glad to report that finally the NFZ patch for my M2 worked!!!!!!!!!!!!!!!!!!!!!
I received a new bird from DJI after being stuck with that issue of freezing at 75% with firmware .0000
This is exactly what I did:
I flashed the bird to .0100 with DUMLdore v3.2 ( I tried to stay away from DJI assistant 2 this time and NDL Mod Client did not recognize the current firmware 0.00.0000) so I used this firmware flashing tool which is awesome by the way.
You need to have the .0100 in your computer first but if you don't have it it's ok, this tool will direct you to another tool which you can use to download virtually all the versions for different DJI birds. You need v1.00.0100 for Mavic 2
Then when on .0100 I used the new Mod Client 1.9.1.0 to apply the NFZ patch.
I am using DJI GO4 4.3.16 which I side loaded into my Android tablet. ( I felt like side loading it and not getting it directly from the Google Play Store) I got it from apkmirror.com
Then this is the order of how I coonected and ran it.
I left the internet connection on to sign in on the tablet into the DJI account but did not connect it physically to the remote control or aircraft. After I signed in and could go into camera view to confirm that the app opens I closed the app turn airplane mode on and connected to the remote control and the aircraft.
I was able to turn on the motors and get a green flashing light at the rear of my bird in a red no-fly zone. You will still get warnings on the remote control and on the app which will disappear after a little while.
I received a new bird from DJI after being stuck with that issue of freezing at 75% with firmware .0000
This is exactly what I did:
I flashed the bird to .0100 with DUMLdore v3.2 ( I tried to stay away from DJI assistant 2 this time and NDL Mod Client did not recognize the current firmware 0.00.0000) so I used this firmware flashing tool which is awesome by the way.
You need to have the .0100 in your computer first but if you don't have it it's ok, this tool will direct you to another tool which you can use to download virtually all the versions for different DJI birds. You need v1.00.0100 for Mavic 2
Then when on .0100 I used the new Mod Client 1.9.1.0 to apply the NFZ patch.
I am using DJI GO4 4.3.16 which I side loaded into my Android tablet. ( I felt like side loading it and not getting it directly from the Google Play Store) I got it from apkmirror.com
Then this is the order of how I coonected and ran it.
I left the internet connection on to sign in on the tablet into the DJI account but did not connect it physically to the remote control or aircraft. After I signed in and could go into camera view to confirm that the app opens I closed the app turn airplane mode on and connected to the remote control and the aircraft.
I was able to turn on the motors and get a green flashing light at the rear of my bird in a red no-fly zone. You will still get warnings on the remote control and on the app which will disappear after a little while.
ı can not found 01.01.100 version where the foun to firemware pls help me
0