FCC mode on 01.00.0510?-nolimitdronez.com

DJ

Total Posts: 3
Joined: 3/29/2020

PM

Posted: 5 years ago

#5218 Quote

Is FCC mode supported on firmware 01.00.0510? https://nolimitdronez.com/mavic-2-info says that boost is not supported, but it doesn't mention FCC at all for any firmware versions.

0

olli

Total Posts: 18
Joined: 10/2/2018

PM

Posted: 5 years ago

#5221 Quote

I went from 510 with the dji assistant back to firmware 400 ...

then patch via NLD FCC .....

then you can update to 510 again. FCC stayed with me.

0

DJ

Total Posts: 3
Joined: 3/29/2020

PM

Posted: 5 years ago

#5222 Quote

Thanks!

0

Zsolt

Total Posts: 2
Joined: 6/5/2019

PM

Posted: 5 years ago

#5239 Quote

olli wrote:

I went from 510 with the dji assistant back to firmware 400 ...

then patch via NLD FCC .....

then you can update to 510 again. FCC stayed with me.

Did you updated to 510 with the DJI Assist, or with the NLD FW update?

Thanks!

0

olli

Total Posts: 18
Joined: 10/2/2018

PM

Posted: 5 years ago

#5240 Quote

after patching, I updated with the dji assistant as normal

0

olli

Total Posts: 18
Joined: 10/2/2018

PM

Posted: 5 years ago

#5241 Quote

I have no way to measure ... but the line is UNDER 90 dbm as described here:

https://greyarro.ws/t/how-to-tell-if-you-are-in-ce-or-fcc-power-mode-using-go4/3315

0

Zsolt

Total Posts: 2
Joined: 6/5/2019

PM

Posted: 5 years ago

#5242 Quote

olli wrote:

I have no way to measure ... but the line is UNDER 90 dbm as described here:

https://greyarro.ws/t/how-to-tell-if-you-are-in-ce-or-fcc-power-mode-using-go4/3315

Thanks!

So I've already have the FCC and .04 FW, so I can just easily update with Assist then ;)

0

DJ

Total Posts: 3
Joined: 3/29/2020

PM

Posted: 5 years ago

#5340 Quote

olli wrote:

I have no way to measure ... but the line is UNDER 90 dbm as described here:

https://greyarro.ws/t/how-to-tell-if-you-are-in-ce-or-fcc-power-mode-using-go4/3315

If the line is below -90 dBm, you're in CE mode.

0